DWL@DWL10000813880
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 2.5.0.0 | * | 05.09.2025 | 4 MB | EXE | AS6_HW_X20CM0985-1.exe | |
| Popis |
V6.0 HW Upgrade (X20CM0985-1) Revision information X20CM0985-1 Version 2.5.0.0: ID: TDYD-9280 Support new HW variant 3 UL6200 Certification Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_2.fw(201), 1\46952_3.fw(201) Version 2.4.0.0: ID: TDYD-8347 Continuous RMS measurement after phase loss Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_2.fw(200) Version 2.3.1.0: ID: 721790 Value area extension for unbalanced load constant current asymmetry (K2). A range of values from 8 to 35 (0.08 to 0.35) is possible Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_2.fw(111) Version 2.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 2.2.0.0: ID: 630775 Configuration parameter implementedto deactivate the evaluation of the current inputs if the generator voltages are missing This prevents a noise at the current inputs being evaluated and leading to incorrect measured values, e.g. when the generator is not connected Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 655725 Frequency measurement improved Plausibility check is more robust against saddle-shaped signals in the areaof the zero crossing. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 670145 Problem at startup of the X2X fixed X2X telegrams are no longer forwarded too early to subsequent X2X slaves during the startup phase. Thus, it is no longer possible for a mismatched FW to be loaded to the subsequent X2X slave. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 680810 Uneven loadmonitoring adapted for high unbalanced load currents With unbalanced load currents above 4 times the nominal current, a fault isno longer immediatelyoutput Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688170 additional continuous current tripping characteristics Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 690325 Module documentation revised Data sheet V 1.45 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_2.fw(110) Version 2.1.0.0: ID: 503770 Units adapted for display in AS Channel descriptionchanged: No Configuration description changed: Yes Firmware changed: No ID: 674135 Adaptations for Automation Studio 4.8 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\46952_2.fw(107) Version 2.0.0.0: ID: 645125 Module documentation revised Data sheet V1.41 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 653650 If the "Over- and undervoltages check method" is configured to "Line voltages" or "Phase and line voltages", the "Over voltage of one phase" configuration is incorrectly used for generator monitoring for "Over voltage 2 of one phase". Before using this upgrade, it is therefore necessary to check the correct configuration of "Over voltage 2 of one phase" for generator monitoring. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_2.fw(107) Version 1.9.0.0: ID: 608520 X5- X3 synchronization not working Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611470 Increased threshold for plausibility check of current inputs in the 1 A measuring range and thus less sensitive to interference Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_2.fw(106) Version 1.8.1.0: ID: 563885 Module documentation revised Data sheet V1.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(105), 1\46952_2.fw(105) Version 1.8.0.0: ID: 545065 Increase of the configurable limitsof ConfigOutput11 and ConfigOutput12 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_1.fw(105), 1\46952_2.fw(105) Version 1.7.1.0: ID: 480835 Enhancement online-help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware:1\46952_1.fw(104), 1\46952_2.fw(104) Version 1.7.0.0: ID: 464525 The unbalance current was displayed incorrectly for current left rotating direction Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 474130 Module documentation revised Data sheet V1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(104), 1\46952_2.fw(104) Version 1.6.1.0: ID: 458530 Module documentation revised Datasheet V1.20 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(102), 1\46952_2.fw(102) Version 1.6.0.1: ID: 397120 Renewed documentation in English Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(102), 1\46952_2.fw(102) Version 1.6.0.0: ID: 378440 Configuration of the direction of rotation possible Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 378455 Extension of the monitoring functions in the generator net and mains Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 378460 Accelerate the release of the synchronization Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_1.fw(102), 1\46952_2.fw(102) Version 1.5.0.0: ID: 351350 Extension: Powermeasurement on 1. harmonic Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\46952_1.fw(101), 1\46952_2.fw(101) Version 1.4.2.0: ID: 306890 Bootup time of X20 system too long if module is configured but not plugged. Channel description changed: No Configuration description changed:Yes Firmware changed: No Firmware: 1\46952_1.fw(100), 1\46952_2.fw(100) Version 1.4.1.0: ID: 293590 Extension to make all configuration registers readable Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(100), 1\46952_2.fw(100) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 2.4.0.0 | * | 12.03.2025 | 4 MB | EXE | AS6_HW_X20CM0985-1.exe | |
| Popis |
V6.0 HW Upgrade (X20CM0985-1) Revision information X20CM0985-1 Version 2.4.0.0: ID: TDYD-8347 Continuous RMS measurement after phase loss Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes Firmware: 1\46952_2.fw(200) Version 2.3.1.0: ID: 721790 Value area extension for unbalanced load constant current asymmetry (K2). A range of values from 8 to 35 (0.08 to 0.35) is possible Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_2.fw(111) Version 2.3.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 2.2.0.0: ID: 630775 Configuration parameter implemented to deactivate the evaluation of the current inputs if the generator voltages are missing This prevents a noise at the current inputs being evaluated and leading to incorrect measured values, e.g. when the generator is not connected Channel descriptionchanged: Yes Configuration description changed: Yes Firmware changed: Yes ID: 655725 Frequency measurement improved Plausibility check is more robust against saddle-shaped signals in the areaof the zero crossing. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 670145 Problem at startup of the X2X fixed X2X telegrams are no longer forwarded too early to subsequent X2X slaves during the startup phase. Thus, it is no longer possiblefor a mismatched FW to be loaded to the subsequent X2X slave. Channel description changed: No Configuration description changed: No Firmwarechanged: Yes ID: 680810 Uneven load monitoring adapted for highunbalanced load currents With unbalanced load currents above 4 times thenominal current, a fault is no longer immediately output Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688170 additional continuous current tripping characteristics Channel description changed: No Configuration descriptionchanged: Yes Firmware changed: Yes ID: 690325 Module documentation revised Data sheet V 1.45 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_2.fw(110) Version 2.1.0.0: ID: 503770 Units adapted for display in AS Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 674135 Adaptations for Automation Studio 4.8 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\46952_2.fw(107) Version 2.0.0.0: ID: 645125 Module documentation revised Data sheet V1.41 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 653650 If the "Over- and undervoltages check method" is configured to "Line voltages" or "Phase and line voltages", the "Over voltage of one phase" configuration is incorrectly used for generator monitoring for "Over voltage 2 of one phase". Before using this upgrade, it is therefore necessary to check the correct configuration of "Over voltage 2 of one phase" for generator monitoring. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_2.fw(107) Version 1.9.0.0: ID: 608520 X5- X3 synchronization not working Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611470 Increased threshold for plausibility check of current inputs in the 1 A measuring range and thus less sensitive to interference Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_2.fw(106) Version 1.8.1.0: ID: 563885 Module documentation revised Data sheet V1.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(105), 1\46952_2.fw(105) Version 1.8.0.0: ID: 545065 Increase of the configurable limits of ConfigOutput11 and ConfigOutput12 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_1.fw(105), 1\46952_2.fw(105) Version 1.7.1.0: ID: 480835 Enhancement online-help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(104), 1\46952_2.fw(104) Version 1.7.0.0: ID: 464525 The unbalance current was displayed incorrectly for current left rotating direction Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 474130 Module documentation revised Data sheet V1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(104), 1\46952_2.fw(104) Version 1.6.1.0: ID: 458530 Module documentation revised Datasheet V1.20 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(102), 1\46952_2.fw(102) Version 1.6.0.1: ID: 397120 Renewed documentation in English Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(102), 1\46952_2.fw(102) Version 1.6.0.0: ID: 378440 Configuration of the direction of rotation possible Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 378455 Extension of the monitoring functions in the generator net and mains Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 378460 Accelerate the release of the synchronization Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\46952_1.fw(102), 1\46952_2.fw(102) Version 1.5.0.0: ID: 351350 Extension: Power measurement on 1. harmonic Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\46952_1.fw(101), 1\46952_2.fw(101) Version 1.4.2.0: ID: 306890 Bootup time of X20 system too long if module is configured but not plugged. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\46952_1.fw(100), 1\46952_2.fw(100) Version 1.4.1.0: ID: 293590 Extension to make all configuration registers readable Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\46952_1.fw(100), 1\46952_2.fw(100) |
|||||
