X90SM546.02-01

Short description

I/O module	2 stepper motor outputs

General information

B&R ID code	0x2F1C
Status indicators	-
Diagnostics
Module run/error	Yes, using software
Supply voltage monitoring	Yes, using software
Power consumption
Bus	Max. 0.1 W
Certifications
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation

Motor bridge - Power unit

Quantity	2
Type	Stepper motor (full-bridge)
Nominal voltage	24 VDC
Nominal current	4 A
Max. current/motor	8 A
Step resolution	256 microsteps per full step

Electrical properties

Electrical isolation	No

Operating conditions

Mounting orientation
Any	Yes
Degree of protection per EN 60529	Up to IP69K

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-40 to 85°C housing surface
Vertical mounting orientation	-40 to 85°C housing surface
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 100%, condensing
Storage	5 to 100%, condensing
Transport	5 to 100%, condensing

Mechanical properties

Dimensions
Width	47 mm
Length	95 mm

Número de material:

X90SM546.02-01

Descripción:

X90 stepper motor module, with current reduction function, module power supply 15 to 32 VDC, 2 motor connections,4 A continuous current, 8 A peak current, NetTime function

Actualizaciones de hardware de Automation Studio	Versión (fecha)	Descargar
V4.7 HW Upgrade (X90SM546.02-01)		EXE / 2 MB Para descargar se debe iniciar sesión

Certificados	Versión (fecha)	Descargar
EU Data Act - X90 - Connected Product Information Notice		PDF / 92 KB Para descargar se debe iniciar sesión

Documentación	Versión (fecha)	Descargar
Data sheet X90SM546.02-01		PDF / 1 MB Para descargar se debe iniciar sesión
X90 mobile System User´s Manual		PDF / 49 MB Para descargar se debe iniciar sesión