X20IF1086-2

Short description
Communication module 1x POWERLINK (V1/V2) managing or controlled node
General information
B&R ID code 0xB455
Status indicators Module status, bus function
Diagnostics
Module status Yes, using LED status indicator and software
Bus function Yes, using LED status indicator and software
Power consumption 1.8 W (rev. <D0: 2 W)
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UKCA Yes
CRA (Cyber Resilience Act) In preparation
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
CCS Yes
KC Yes
Interfaces
Fieldbus POWERLINK (V1/V2) managing or controlled node
Type Type 4
Standard (compliance) ANSI/IEEE 802.3
Variant 1x duplex LC
Transfer rate 100 Mbit/s
Transfer
Physical layer 100BASE-FX
Half-duplex Yes
Full-duplex POWERLINK mode: No / Ethernet mode: Yes
Autonegotiation No
Auto-MDI/MDIX No
Controller POWERLINK MAC
Wave length Typ. 1300 nm
Rx range: 1270 to 1380 nm
Tx range: 1270 to 1380 nm
Cable fiber type Multimode fiber with 62.5/125 µm or 50/125 µm core diameter
LC connector on both sides
Optical power budget
Glass fiber 62.5/125 µm, NA = 0.275 11 dB
Glass fiber 50/125 µm, NA = 0.200 7.5 dB
Line length
Ethernet TCP/IP Max. 400 m between 2 stations (segment length)
POWERLINK Max. 2 km between 2 stations (segment length)
Electrical properties
Electrical isolation PLC isolated from POWERLINK (X1)
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Slot In the X20 PLC
Material number:
X20IF1086-2
Description:
  • POWERLINK for real-time Ethernet communication
  • 100 Base-FX port
  • Poll response chaining
  • Dynamic Node Allocation (DNA)

The interface module is used for application-specific expansion of the X20 controllers. It is equipped with a POWERLINK interface.

This interface uses a 100 Base-FX port. The POWERLINK connection is made using 62.5/125 μm or 50/125 µm fiber optic multimode cable with a duplex LC connection. The module and network status is indicated using LEDs.

Aktualizacja Automation Studio HW Version (Date) Download
V3.0 HW Upgrade (X20IF1086-2) EXE / 1 MB
V4.0 HW Upgrade (X20IF1086-2) EXE / 982 KB
Certyfikaty Version (Date) Download
2226379 CSA Certificate of Compliance X20 X67 PDF / 366 KB
CCS Type Approval Certificate - X20 PDF / 285 KB
E115267 UL Certificate of Compliance X20 PDF / 2 MB
EU Data Act - X20 IO - Connected Product Information Notice PDF / 92 KB
EU Declaration ATEX X20 PDF / 218 KB
EU Declaration of conformity PLC X20 PDF / 169 KB
FTZU 09 ATEX 0083X PDF / 771 KB
UK Declaration PLC X20 PDF / 151 KB
X20, X67 KC certificates PDF / 6 MB
Dokumentacja Version (Date) Download
Data sheet X20IF1086-2 PDF / 1 MB
X20 Package leaflet ATEX/CSA PDF / 2 MB
X20 System User´s Manual PDF / 45 MB
E-CAD (szablony Electro lub EPLAN) Version (Date) Download
X20 EPLAN P8 from V2.4 EXE / 160 MB
M-CAD (Mechan. szablony) Version (Date) Download
3D File STEP - X20IF1086-2 ZIP / 1 MB

Wybierz kraj i język

B&R Logo