Short description
| I/O module | 2 stepper motor outputs |
General information
| B&R ID code | 0xFABA |
| Status indicators | - |
| Diagnostics | |
| Module run/error | Yes, using software |
| Supply voltage monitoring | Yes, using software |
| Power consumption | |
| Bus | Max. 0.1 W |
| Certifications | |
| CE | Yes |
| UKCA | Yes |
Motor bridge - Power unit
| Quantity | 2 |
| Type | Stepper motor (full-bridge) |
| Nominal voltage | 48 VDC |
| Nominal current | 4 A |
| Max. current/motor | 8 A |
| Step resolution | 256 microsteps per full step |
Electrical properties
| Electrical isolation | No |
Ambient conditions
Mechanical properties
| Dimensions | |
| Width | 47 mm |
| Length | 95 mm |
Material number:
X90SM546.02-00Description:
- 2 stepper motors with 4 A
- 15 to 60 VDC
- X2X Link
The SM option board offers the possibility of connecting two 4 A stepper motors with 15 to 60 V. Communication with the mainboard is made possible via X2X Link.
| Aktualizacja Automation Studio HW | Version (Date) | Download |
|---|---|---|
| V4.7 HW Upgrade (X90SM546.02-00) | EXE / 1 MB |
| Dokumentacja | Version (Date) | Download |
|---|---|---|
| Data sheet X90SM546.02-00 | PDF / 1 MB | |
| X90 mobile System User´s Manual | PDF / 49 MB |
| E-CAD (szablony Electro lub EPLAN) | Version (Date) | Download |
|---|---|---|
| Makro-/Artikeldaten 4.0.2 (X90SM546.02-00) | EXE / 910 KB | |
| X90 EPLAN P8 from V2.4 | EXE / 69 MB |