Short description
| Potential distributor module | 6x GND, 6x 5 VDC on the terminals |
General information
Encoder power supply
| Quantity | 6 |
| Nominal voltage | 5 VDC ±5% |
| Connection type | 2-wire connections |
| Additional functions |
Short-circuit monitoring Overload error starting at 200 mA |
| Insulation voltage between channel and bus | 500 Veff |
Electrical properties
| Electrical isolation | I/O power supply isolated from output |
Operating conditions
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Horizontal mounting orientation | -25 to 50°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | - |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Note |
Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
| Pitch | 12.5+0.2 mm |
物料号:
X20PD0053描述:
- Free shunting potentials
- Monitoring the outputs
The potential distribution module provides 6x 5 VDC and 6x ground on the terminal connections. It thus offers additional wiring options for actuators or sensors. The supplied 24 VDC and status of the outputs are monitored.
必备附件
| Automation Studio硬件升级 | 版本（日期） | 下载 |
|---|---|---|
| V4.0 HW Upgrade (X20PD0053) | EXE / 599 KB |
| E-CAD（电子或EPLAN模板） | 版本（日期） | 下载 |
|---|---|---|
| Makro-/Artikeldaten 4.0.2 (X20PD0053) | EXE / 763 KB | |
| X20 EPLAN P8 from V2.4 | EXE / 160 MB |
| 文档 | 版本（日期） | 下载 |
|---|---|---|
| Data sheet X20PD0053 | PDF / 702 KB | |
| X20 System User´s Manual | PDF / 45 MB |