Short description
| I/O module | 4 digital input channels, 4 digital channels configurable as inputs or outputs, 2 analog outputs ±10 V, reACTION Technology |
General information
Encoder power supply
Digital inputs
| Quantity | 4 standard inputs and 4 mixed channels, configuration as input or output using software |
| Nominal voltage | 24 VDC |
| Input voltage | 24 VDC -15% / +20% |
| Input current at 24 VDC | Typ. 1.3 mA |
| Input circuit | Sink |
| Input filter | |
| Hardware | <3 µs |
| Software | Default 200 ns, configurable between 200 ns and 5 ms in 10 ns intervals |
| Connection type | 1-wire connections |
| Input resistance | 18.16 kΩ |
| Switching threshold | |
| Low | <5 VDC |
| High | >15 VDC |
| Insulation voltage between channel and bus | 500 Veff |
ABR incremental encoder
| Quantity | 1 |
| Encoder inputs | 24 V, asymmetrical |
| Counter size | 32-bit |
| Input frequency | Max. 333 kHz |
| Evaluation | 4x |
Digital outputs
Analog outputs
Electrical properties
| Electrical isolation |
Channel isolated from bus Channel not isolated from channel |
Operating conditions
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | See section "Derating and hardware configuration". |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Note |
Order 2x terminal block X20TB12 separately. Order 1x bus module X20BM31 separately. |
| Pitch | 25+0.2 mm |
物料号:
X20RT8202描述:
- reACTION technology module
- 4 high-speed digital inputs
- 4 high-speed digital channels, configurable as inputs or outputs
- 2 high-speed analog outputs ±10 V
- 1 ABR incremental encoder input 24 V
- Pulse width modulation
- 24 VDC and GND for encoder supply
- Supports blackout mode
This reACTION technology module has 4 high-speed digital inputs and 4 high-speed digital mixed channels. All connections are designed for 1-wire connections. All inputs are designed for sink connections, the outputs for push-pull connections.
A voltage signal of ±10 V can be output using 2 analog outputs.
Ultrafast reACTION Technology makes it possible to control the integrated I/O channels with response times down to 1 μs. All of the commands that can be used for reACTION programs are provided as function blocks in special libraries (e.g. AsIORTI). Programming in compliance with IEC 61131-3 requirements takes place in the Function Block Diagram editor in Automation Studio.
The module supports blackout mode. In blackout mode, programmable module functionality persists even if the network fails.
必备附件
| Automation Studio硬件升级 | 版本（日期） | 下载 |
|---|---|---|
| V4.1 HW Upgrade (X20RT8202) | EXE / 3 MB |
| E-CAD（电子或EPLAN模板） | 版本（日期） | 下载 |
|---|---|---|
| X20 EPLAN P8 from V2.4 | EXE / 160 MB |
| M-CAD（机械模板） | 版本（日期） | 下载 |
|---|---|---|
| 3D File DXFSTEP X20 Double IO Slice | ZIP / 117 KB |
| 文档 | 版本（日期） | 下载 |
|---|---|---|
| Data sheet X20RT8202 | PDF / 3 MB | |
| X20 System User´s Manual | PDF / 45 MB | |
| reACTION Technology user´s manual | PDF / 12 MB |